Products will experience aging phenomena such as cracking, chalking, fogging, fading and yellowing both indoors and outdoors. SONACME xenon test chamber can simulate the damage caused by full-spectrum sunlight, high temperature and humidity, and can reproduce the aging effect of products for months or even years in a few days or weeks.

The current best accelerated method for testing coating aging is SAE J2527. This method stipulates that the aging test is carried out in a xenon test chamber. After filtering by a filter, the xenon lamp light source produces a spectral power distribution (SPD) similar to that of sunlight; and the temperature, humidity in the xenon test chamber and spraying on paint samples of liquid water can be controlled, with the hope of simulating coating failure conditions comparable to outdoor Florida exposures in a short period of time.

In order to explore the role of water in accelerated weathering testing, ensuring that the type of water (humidity or liquid water) and water attack time must be consistent with the type of water and water attack time at the specified location outdoors, this paper presents paint samples in Florida and other A detailed analysis of the amount and type of water in the area's outdoor exposure conditions, also describes the amount of water sprayed when the paint samples are exposed to weathering equipment that performs the SAE J2527 test standard, and compares these results with each other for different paints The maximum theoretical water consumption of the system. From the data, it can be analyzed that the water consumption when testing paint samples with different aging equipment is different.

SONACME has come to the suggestive conclusion that by improving the accelerated aging test conditions, more accurate results can be provided in a shorter time.

Sonacme Technology Environmental Test Chamber And Xenon Test Chambers For Coating Aging Test Capability

Accelerate Aging By Evaluating Changes In Material Properties

Cyclic Corrosion Test Under Temperature Humidity Salt Spray Corrosion Test Chamber

Performance Evaluation According To ISO, IEC, EN, BS, DIN, ASTM, AMMA, MIL, JIS, Singapore Standards

UV Accelerated Aging Test Chambers

Xenon Test Chambers

The Xenon test chambers Is Only One Of The Environmental Test Chambers We Provide. Sonacme Technology Also Develops And Produces Temperature Humidity Test Chambers, Rapid Temperature Change Test Chambers, Thermal Shock Chambers, AGREE Test Chamber, Xenon Arc Weathering Test Chambers, UV Light Accelerated Aging Test Chambers, Etc.

For More Information On How Sonacme Technology's Altitude Test Chamber Can Help You Meet Your Low Pressure Testing Needs, Please Contact Us And We Will Develop A Test Solution That Suits You.