In the environmental testing industry, the aging test chamber is a general term for products, mainly including: ozone aging, ultraviolet aging, argon lamp aging, high temperature aging, salt spray corrosion aging and other aging tests. It is one of the important means of artificial environment climate test. What should I pay attention to when using the aging test machine?
1. For power supply equipment, an overload fuse device should be installed on the power supply line, with a special and good grounding device for the box. 　　Second, samples; preparation, after the samples are numbered one by one, put them on the turntable, try not to touch or collide between the samples.
3. Turn off the switches of the control system, insert the power plug and turn on the power switch dial, which automatically rotates, and at the same time the power indicator of the control system lights up. The switches (ie, high temperature switch and low temperature switch) must be turned on when the temperature rises to adjust the automatic control system.
 Fourth, the outer shell of the aging tester must be grounded effectively to ensure safe use.
5. It should be placed in a well-ventilated indoor horizontal position, and no flammable or explosive materials should be placed around it.
6. Set the gate switch of the iron shell on the power supply line to provide the particularity of the box. Check the electrical performance of the box before the shell of the aging tester is grounded and energized. Pay attention to whether there is open circuit or leakage. The aging tester does not have explosion-proof devices. , Do not put flammable and explosive materials.
Seven. Don’t overcrowd the things in the box, leave a certain space, and use hot air to circulate.